1967 60′ x 30′ Self-Propelled Spud Barge Price: $225,000 CDN Draft 5.5 - 6' Deck load: 90 tons 4 spud pockets, 2 spuds and 2 spares 16″ x 40′ Hydraulic winches Powered by Detroit 6-71 with Harbormaster unit, 260 hp 7.5kw diesel generator Fuel capacity: 500 gal Complete workshop in engine room Well built, pristine condition (3) 24″ I-beam beaching keels Draws about 5′ Could convert to jack up barge Location: Ontario... read more

1978/2000 14.39m x 4.82m x 1.71m Aluminum 46 PAX Twin Screw, Double Deck Passenger Boat 47.1' x 15.8' x 5.7' Certified for Inland II Waters Originally built in 1978 - rebuilt in 2000 Bulkheads: 5 Headroom: Wheelhouse and cabin - 7', Engine room - 6.5' (2) 204 hp CAT engines (2010) (2) ZF 220A 2:1 transmissions Shaft size: 2" Hydraulic steering Cruising speed: 9.4 knots Navigation Equipment: 2 VHF Radios, Furuno GPS, Furuno Radar, Compass Fuel capacity: 2000 litres Fresh water capacity: 250 litres Holding tank: 500 litres Head: Yes Safety equi... read more

64′ x 18′ 1100 hp Tug with Retractable Wheelhouse New Price: $99,900 USD With great lines and loads of power, she’s ready to go, go, go! Modernized in the 1970’s with the addition of a retractable wheelhouse Built in 1903 by Johnston Brothers of Ferrysburg, Michigan Last survey 2012 6′ draft Double steel hull Powered by Detroit 16-V149, 1100 hp Twin Disc MG 540 Generators: 2 – 1 Perkins, 1 Detroit Fuel capacity: 2000 gal Lube oil capacity: 200 gal Cruising speed 10 knots Prop: 4 blade 76″ x 54″ turning a 6″ shaft Good over... read more

1980/2003 26′ x 9.5′ x 33″ Custom Built Steel Trawler/Tug Price: $15,000 USD - Reasonable Offers Considered THIS BOAT HAS BEEN LAID UP AND IS BEING SOLD AS PART OF AN ESTATE Built in Ontario by Wray Brown, this vessel has timeless lines and will need a little work to look her best again Shell plating 1/4″ Powered by Volvo AC131A, 130 hp Transmission is Borg Warner Shaft: 2″, Propeller: 21″, 3 blade bronze Cruising speed: 8 knots Electronics: VHF radio, depth sounder Accommodations: room to sleep two, head and small galley area Wood interior Tr... read more

1983 30′ x 9′ Welded Steel Motor Boat Project Boat Price: $9,500 CDN or Best Offer This project boat has nice lines and loads of potential! 3′ Draft Built by Kettle Creek Boat Works, Port Stanley, Ontario, Hull #1 Registered tonnage: 4.5 tons Engine is Perkins (1983) 4.108 51 hp diesel Condition of propulsion system: not run in 8 years Stainless fuel tank estimated 80 – 90 gal capacity Shell plating is 3/16″ with 1/8″ on cabin sides and top 2″ x 3/16″ flat bar ribs on 24″ centers 1″ x 3/16″ flat bar longitudinal hull ... read more

1995 17′ x 6.5′ x 1′ Steel Flat Bottom Jet Propelled Work Boat Price: $3,500 CDN •Jet: Hamilton Jet • Engine: 302 Ford Mercruiser- gas • Top speed 30 to 35mph • Great shallow draft work Boat •Includes single axle trailer Located in Port Dover, Ontario... read more

10′ x 11′ Antique Trotman Style Anchor Price: $20,000 USD obo Weight approx. 4,000 lbs Location: Ohio... read more

2010 Portable Suction Dredge Price: $147,000 CDN Width: 8’6 Length: 26', Cutter head 18' Draft: 20″ 6″ Suction, 8″ Discharge Both sides can discharge or can be discharged out stern valves on discharge lines Digging depth approx 8′ Articulating cutter head – approx 6′ swing Powered by a 4-53 GM Located in Southern Ontario (Lake Erie area) File Ref D2138... read more

Timberland 5 Drum Mechanical Winch Centre drum has a dog D311 CAT power With a funk reversing drive Electric frictions.... read more

12V92 Detroit Diesel •Price $3,500 CDN •Core engine was driving a generator •305 hours on meter •700 hp @ 2100 rpm •Heat exchanger cooled •Located in: Southern Ontario (Port Dover)... read more