Moody 36 built by Marine Projects of Plymouth to designs by Bill Dixon, 1997 GRP deck and superstructure, centre cockpit design with synthetic cockpit seats and sole. Bilge keel. Wheel steering. A fine example of one of the best yachts produced by Marine Projects, for Moody. Built to exceptionally high standard of finish, she is a pleasure and a joy under sail. The 40 HP Volvo engine is reliable and powerful and more than adequate for fast passage making, or maneuvering. The centre cockpit provides a safe and dry environment when under way and the accommodation, layout and equipment fit are i... read more

LOA:7.32mtrs Beam:9’ 4” Draft:4’ 11” Disp: 3500lbs ENGINE: Johnson Sailmaster 4HP Outboard engine. ACCOMMODATION: Gaboon timber interior(lightweight). 4/5 Berths SPARS RIGGING AND SAILS: Fractional rig. UK Mc Williams Mainsail Tapedrive.Mc Williams Genoas:No1,2 and 3,North Genoas:Medium No 1. Ullman furling jib Dacron with UV strip,Ullman No 3 Dacron. 1x1.5oz Kite Purple/white,2xPink/Black kites1x Ullman Green/white kite.Harken 00 Jib furler, which can be removed to adjust for racing.Rigged for 3 reefing points. All lines lead back to cockpit. The a... read more

LOA: 9.14M / LWL: 6.71M / BEAM: 3.02M / DRAFT: 1.40M / DISP: 3493KGS The ‘Arpege 30’ (Dufour) Designed by Michel Dufour, Built by Dufour (FRA) FG Construction, Masthead sloop, Fin keel with rudder on skeg. Besides being a truly innovative design that set a new standard at the time, the ARPEGE is also one of Dufour’s most successful models, financially and on the race course. For the US market, the ARPEGE was sold in 2 versions, one at 30 feet and one at just under 30 feet, the latter to accommodate the MORC rule. Some boats had a deeper keel. More than 1500 were sold... read more

LOA: 8.68m/28’6”ft / BEAM: 2.51m/8’3”ft / DRAFT: 1.5m/4’9”ft /DISP: 3,091kg Design by Tord Sunden. Builder Turan Venevestiamo Abo Bartvarb of Turku, mid 1970s. Round bilge hull, raked stem, cut away forefoot, long fin keel and reverse counter stern. Masthead Bermudan sloop rig set on a deck-stepped mast. CURRENT LOCATION: Hardstanding - Partington Marine yard... read more

LOA: 9.85m – 32’4” / BEAM: 3.43m – 11’3” / DRAFT: 1.78m – 5’10” /DISP: 3518kg Built by Vervale (1979) GRP construction, Cast iron fin, Fractional sloop, White hull, Sail No. GBR 7762 R, registered SSR150507 Currently afloat on Pwllheli Marina. Extensive upgrading, modernising and completion of all major works makes Molly Ava a sleek and modern sea and race worthy vessel. CURRENT LOCATION: Pwllheli Marina – Plas Heli pontoon... read more

LOA: 26’ / LWL: 21’4” / BEAM: 8’5” / DRAFT: 3’ / Disp: 6700 lbs Twin keel, Masthead sloop, Built by Westerly Marine Ltd. The Westerly Centaur was designed in 1968 by Jack Laurent Giles as a more modern and roomier replacement for the existing Westerly 25. She was probably the first mass-production yacht to have had the design tank-tested before a prototype was built, and this, plus Laurent Giles's earlier experience with bilge keel designs, was probably the reason for the Centaur's good performance under sail. Looking at a roomy boat with good he... read more

Westerly Westerly Centaur Twin Bilge LOA: 26ft / LWL: 21ft4 / BEAM: 8ft 5 / DRAFT: 3ft / Disp: 6700 lbs The Westerly Centaur was designed in 1968 by Jack Laurent Giles as a more modern and roomier replacement for the existing Westerly 25. She was probably the first mass-production yacht to have had the design tank-tested before a prototype was built, and this, plus Laurent Giles's earlier experience with bilge keel designs, was probably the reason for the Centaur's good performance under sail. Looking at a roomy boat with good headroom and a powerful diesel makes many people rega... read more

The Corribee was first built in 1965 to a design by Robert Tucker for a 21' clinker built yacht. The design was bought by Newbridge Yachts in the late 1960s. ACCOMMODATION: Four Berths in a Single Cabin. Two Single Berths in Forward Cabin with Two Single Berths Aft. DOMESTIC EQUIPMENT: Toilet. Galley Area with Sink. SPARS, RIGGING and SAILS: Sloop Rigged with Deck-Stepped Alloy Mast and Boom. Roller Main and Slab Reefed Genoa. Sails: 1 x Main, 1 x Genoa, 1 x Storm – refurbished and cleaned 2006. Stainless Steel Standing Rigging – Renewed 2006. ELECTRONICS: Compass. SAF... read more

LOA: 6.65m/21.83ft / BEAM: 2.11m/6.92ft / DRAFT: 0.99m/3.25ft /DISP: 1,101kg Pandora MK1 bilge keel, Fibre Glass, Designed by E.G. Van de Stadt, built by Rydgeway Marine. Pandoras are great sailing boats. Bilge keel version of this popular day sailor, makes it an ideal family boat for exploring coastal waters. Despite its relatively small size, it’s an extremely sea worthy boat whose ability matches many larger craft. The boat is noted for being responsive and light on the helm. The interior is an open plan design comprising three berths. Headroom is generous at around 4′ 8&Prim... read more

‘Saraffina’ is a sloop rigged day-sailing yacht, designed by B.L.Dunphy and built by Wm Partington Marine (1964) The round bilge hull has a spoon bow, long keel and a counter stern. The superstructure consists of fore, side and aft decks, the small coachroof and the open cockpit. The yacht is fractional sloop rigged - £7,500.00 ‘Sara Bach’ is a sloop rigged day-sailing yacht, designed by BL Dunphy and built by Wm Partington Marine (1960) The round bilge hull has a spoon bow, long keel and a counter stern. The superstructure consists of fore, side and aft decks,... read more